Skip to content Skip to sidebar Skip to footer

How To Tie A Motorcycle To A Trailer

How To Tie A Motorcycle To A Trailer. At first, you should fix one of the ratchet straps against the motorcycle kickstand tightly. Transporting in a truck is the easiest and so is tying your motorcycle in such vehicle.

Full Overview for LuckyBike Ratchet Strap Motorcycle & ATV
Full Overview for LuckyBike Ratchet Strap Motorcycle & ATV from www.youtube.com

Don’t tie anything directly to the exhaust pipes, as it could damage them. After that, connect the strap’s lower part to the trailer hooks in every position and place the slack on the trailer’s floor where you can easily reach it after loading your motorcycle. Do this on all the other ratchet.

The Best Way To Carry A Bike Is In A Trailer, Truck, Cargo Container Or Hitch Carrier.


Transporting in a truck is the easiest and so is tying your motorcycle in such vehicle. Tying down a motorcycle properly is an important part of transporting it safely. Then, compress your shocks a bit — this will prevent the straps from disengaging if you drive on a bumpy road.

The Only Safe Way To Secure A Motorcycle To A Trailer Is Using Ropes, Or Straps, And Selecting Suitable Anchor Points For These On Both The Trailer And The Motorcycle.


In the front, you can use the front forks of the bike for the tie down. Choose your anchor points carefully; Finally, let’s talk about tying down the bike properly onto the enclosed trailer.

Fix The Strap To A D Ring On The Trailer’s Surface To Hold It In Place.


Don’t tie anything directly to the exhaust pipes, as it could damage them. The second strap should be placed diagonally from the first strap. If there is any play in the straps during this test, then rework your tension until you have it right.

Grab The Handle Bars And Shake The Bike.


If you pull the bike, the trailer moves and not the bike. The bike should now act as an extension of the trailer, as if it is welded to the floor. Compress your shocks a little, so the straps won’t disengage if you hit a bump in the road.

Using An X Pattern Gives The Greatest Stability And Attaching The Straps High On The Bike Is Preferable To Attaching Them Low.


At first, you should fix one of the ratchet straps against the motorcycle kickstand tightly. Chokes therefore play no part in securing a motorcycles to a trailer. Tips for securing a motorcycle on a trailer.

Post a Comment for "How To Tie A Motorcycle To A Trailer"